What are T bolts used for

T-bolt can be placed directly into the aluminum profile groove, in the installation process it can be automatically positioned and locked, often used with flange nuts, is the standard supporting connector when installing corner parts, according to the profile groove width and different series of profiles to choose to use. T-bolts are movable anchor bolts.

Below is a list of contents

• Standard for T-bolts

• Surface treatment of threaded rods

Standard for T-bolts

The national markings for T-bolts are:

GB/T 2165-1991 Machine Tool Fixture Parts and Components T-bolts quick release bolts (obsolete) adjusted to JB/T 8007.2-1995, and later replaced by JB/T 8007.2-1999 | machine tool fixture parts and components T-bolts quick release bolts

GB/T 37-1988 Bolts for T-type slots

There is also a mechanical standard: JB/T 1709-1991 T-bolts (obsolete), replaced by JB/T 1700-2008 valve parts nuts, bolts and screws.

At this stage, the commonly used are DIN186 T type square neck bolts, national standard GB37, DIN188T double neck bolts, materials are carbon steel, stainless steel, alloy steel, etc., specifications from M8-M64 range, good quality control of domestic quality hardware production - Musheng, has formed a mature process.

Basic features of T-bolts

(1) What is a T-bolt?

Bolt a kind of nut, and bolts or screws screwed together for tightening parts, according to the different uses in the production and manufacturing machinery, the same component can be divided into several categories including carbon steel, stainless steel, non-ferrous metals and so on according to the different materials. Because of the ease of installation and unloading, it is convenient to install the parts in any position, which can greatly improve labor productivity, which is also the reason why the T-nut can be widely used in the T-slot of various milling machines.

(2) The use of T-bolts:

1. The T-bolts fast and hexagon bolts are installed on the corner parts, and there is no need to tighten.

2. The T-bolts is stuck in the groove along the aluminum profile slot and equipped with a shrapnel flat pad.

3. T-bolts is to use a screwdriver to tighten it.

(3) Characteristics of T-bolts:

It is the use of the bevel principle, the bevel deformation is integrated, so as to form a thread, and then it is rotated into a parallel movement, the lead screw is rotated around, and the nut is moved to a pitch. T-bolts save time and effort.

(4) Introduction of T-bolts:

T-bolts, known as hammer bolts in the European standard, are made of carbon steel with galvanized or nickel-plated surfaces

(5) The use of T-bolts:

T-bolts can be placed directly into the aluminum profile groove, in the installation process it can be automatically positioned and locked, often used with flange nuts, is the standard supporting connector when installing corner parts, according to the profile groove width and different series of profiles to choose to use. T-bolts are movable anchor bolts.

(6) The role of T-bolts

Don't look at it small, but the role is infinite, bolt is a fastener that can be seen everywhere in the production of days, it is usually used to mix with nuts, for fastening and connecting two parts with through holes, and usually only need to use a wrench to screw clockwise at fixed times. Rotate counterclockwise at the time of disassembly to be able to take it down. The T-bolts plays a great role in the fixing of the railway sleeper and the fixing of the glass curtain wall, which is the glass curtain wall T-bolts.

Ningbo yipianhong Fastener Co., Ltd. was established in 2001, specializing in the production of various types of T-bolts, nuts, T-bolts, with an annual production capacity of 30,000 tons and an annual turnover of 300 million yuan. The products include ANSI/ASTM, DIN, BS, ISO, GB, JS, and other standards, mainly used in the field of T-bolts seals and oil pipeline valves.