What are Chipboard screws?

Chipboard screws or chipboard screws are a type of self-tapping screw with a thin shaft and coarse threads. Particleboard is composed of resin and wood chips or chips, so chipboard screws are used to clamp this composite material and prevent it from pulling out.

The following is an introduction to the content

• The basic situation of chipboard screws

• How to use chipboard screws

• Chipboard screw length

• Different Types of Chipboard screws

The basic situation of chipboard screws

These chipboard screws securely hold particleboard to particleboard, or to other materials such as natural wood. There are many different chipboard screw types from materials and sizes. The screws are available at most larger hardware stores in packs of 50 for less than $5 (USD).

How to use chipboard screws

A chipboard screw with drilled holes was invented to fasten low, medium and high-density chipboards. Since chipboard doesn't have a natural texture to stop the chipboard screws from pulling out, these chipboard screws usually have clamps on the head called prongs. Chipboard screws are thin to avoid coarse grains to hold the board in place. Many of these chipboard screws are self-tapping, so there is no need to drill holes first. Some screws even have special protrusions around the head to remove particleboard material when countersunk.

Chipboard screw length

Chipboard screws are available in a variety of lengths and can be used to fasten particleboard in a variety of applications. Average length chipboard screws are commonly used to attach particleboard floors to common wood joists. Smaller screws can be used to attach the hinges to the particleboard cabinets. When making cabinets, long screws can be used to butt the chipboard to the chipboard. The average screw is 1.5 inches (about 4 cm), small screws are usually ½ inch (about 1.5 cm), and longer screws are 5 inches (about 13 cm).

Different Types of Chipboard screws

Chipboard screws of different shapes and materials are also common. The most common chipboard screws are zinc chipboard screws, yellow zinc chipboard screws, brass chipboard screws or black oxide chipboard screws. Flat head chipboard screws, flat head or flared chipboard screws are common, and the most popular gauges are 8 and 10. Chipboard screws may have screw drivers, chipboard screws are commonly used in cabinets and floors, and can be found at most large hardware stores. Special-sized chipboard screws or chipboard screws made from less common materials can be purchased directly from the supplier.

Packs of 50 chipboard screws can range from $5 to $10, depending on size and material, and while chipboard screws can be purchased in bulk at a discount, special particleboard tools are generally not required to secure chipboard screws.

Ningbo yi pian hong Fastener Co., Ltd. was established in 2001, specializing in the production of all kinds of high-strength bolts, nuts, and threaded rods, with an annual production capacity of 30000 tons and an annual turnover of 300 million yuan. Products include ANSI / ASTM, DIN, BS, ISO, GB, JS, and other standards, which are mainly used in the field of high-strength seals and oil pipeline valves.